PE-RT 5-layer pipes

Tycroc PERT pipes are made of the high-performance material PE-RT and are designed for use in various water-based heating and cooling systems. Tycroc PERT pipe is an oxygen-tight composite pipe that consists of 5 layers, combining high flexibility, reliability and a long service life. The base pipe and the outer layer are made of PE-RT and thus enclose the sensitive EVOH oxygen barrier layer, which helps protect the heating system against oxygen diffusion. In order to ensure an inseparable connection of the materials, they are firmly fused together by layers of adhesive polymer. The result is a high-quality, highly flexible and durable pipe with a securely protected oxygen barrier layer.
Tycroc PERT pipes are primarily used in underfloor heating systems, including solutions with Tycroc UHP underfloor heating panels, as well as in floor constructions covered with concrete or gypsum screed. In addition, the pipes are suitable for ceiling and floor cooling, as well as ceiling and wall heating.

PERT Pipes Processing & Installation Instructions EN

PERT Pipes technical datasheet (TDS) EN

PERT Pipes environmental declaration (EPD) EN

STANDARDS AND COMPLIANCE

Tycroc PERT 5-layer pipes are produced according to the international standards DIN ISO 22391 / DIN ISO 24033 / DIN ISO 21003 / DIN 16833. In addition, according to the national standards BRL 5602, BRL 5607 and the SKZ guidelines HR 3.16. The oxygen tightness is determined according to ISO 17455 and DIN EN ISO 291 and fulfils the requirements according to DIN 4726, BRL 5602 and BRL 5607. The production and product monitoring is carried out by KIWA N.V. and SKZ Würzburg. The pipes meet the requirements of ISO 10508 (class 5) 6 bar.

warranty

For our pipes we provide 50 years warranty, included first 10 years with insurance protection up to 5 million euros to compensate all costs of damages and any subsequent connected damages, caused by us, due to the use of defective product.

PRODUCTSDIMENSIONS
PERT16-12016 × 2,0 mm 120 m
PERT16-24016 × 2,0 mm 240 m
PERT16-48016 × 2,0 mm 480 m
PERT16-64016 × 2,0 mm 640 m
PERT17-12017 × 2,0 mm 120 m
PERT17-24017 × 2,0 mm 240 m
PERT17-48017 × 2,0 mm 480 m
PERT20-12020 × 2,0 mm 120 m
PERT20-24020 × 2,0 mm 240 m
PERT20-48020 × 2,0 mm 480 m
PERT20-64020 × 2,0 mm 640 m
TECHNICAL DATA
PARAMETERVALUESTANDARD
MaterialPE-RT Type IIISO 22391
Max. operating temperature90 ° CISO 10508 (class 5)
Max. operating pressure 6 barISO 10508 (class 5)
Thermal conductivity at 20 °C0,41 W/(m·K)DIN 52612
Linear thermal expansion coefficient0,195 mm/(m·K)DIN 52328
Outer wall roughness0,007 mmacc. Prandl/Colebrook
Oxygen diffusion resistance at 40 °C< 0,32 mg/(m²·d)DIN 4726 (class 4)
Oxygen diffusion resistance at 80 °C< 3,60 mg/(m²·d)DIN 4726 (class 5)
Related Products
manifolds
actuators
bend supports
compression adapters
valves with handles

uhp
nob
thermostat

underfloor heating / cooling manifold

Tycroc TSL modular distribution manifold made of glass fiber reinforced poly-amide. The manifold is modular to be easily adapted to the length and number of connections they serve. The modification does not involve the use of special tools and can be done on site by simply locking or unlocking the individual modules of the manifold. The hydraulic seal is ensured by generous internal double O-rings.
Manifold is lightweight, modern and robust made of reinforced polyamide. The easiest way to assemble a manifold – SCREW & LOCK solution. Ideal for heating and cooling.

PRODUCTSDIMENSIONS
TSL11¼” - 1 × 3/4" Euro
TSL21¼” - 2 × 3/4" Euro
TSL51¼” - 5 × 3/4" Euro

  • Maximum operating temperature: 75°C

  • Minimum temperature: 10°C

  • Maximum operating pressure: 6 bar

TSL Modular Manifold Assembly Instructions MULTI-LANG

TSL Modular Manifold Technical Data Sheet (TDS) EN

 

The pre-assembled modular manifold Tycroc TSL5 including
  • 5 x ¾” flow modules and 5 x ¾” return modules with micrometric flow regulators for each circuit
  • 2 x 1¼” main piping connections (male)
  • supply flowmeter 0-5 l/min for every circuit
  • main flow and return thermometers 0-60°C
  • manual air vent
  • load/drain cock
  • piping connnections ¾” eurocone
  • room labels and clips
  • wall and cabinet fixing brackets
The pre-assembled modular manifold Tycroc TSL2 including:
  • 2 x ¾” flow modules and 2 x ¾” return modules with micrometric flow regulators for each circuit
  • 2 x 1¼” main piping connections (male)
  • supply flowmeter 0-5 l/min for every circuit
  • main flow and return thermometers 0-60°C
  • manual air vent
  • load/drain cock
  • piping connnections ¾” eurocone
  • room labels and clips
  • wall and cabinet fixing brackets
TSL1 single modules for Tycroc TSL manifold:​
  • 1 x ¾” flow module and 1 x ¾” return module with micrometric flow regulator for circuit
  • supply flowmeter 0-5 l/min for every circuit
  • piping connnections ¾” eurocone
CHARACTERISTICS AND ADVANTAGES
  • lightweight and robust manifold made of glass fiber reinforced polyamide
  • the easiest way to assemble a manifold – just screw and lock
  • ideal for heating and cooling
  • installation without special tools
  • modular – possibility to add and remove single modules
  • integrated safety clips to assemble the manifold
  • self-insulating through integrated air chambers
  • internal insulated pipe outlets
  • all modules are sealed by double internal O-rings
  • 100% tightness test
  • reversible – main connection left or right as desired on installation site
  • modules turnable up and down
  • room labeling and clips
  • wall fixing brackets
  • ready to connect and operate

Tycroc TSA actuators

TSA24_01

Tycroc TSA is an ON-OFF type electric actuator for underfloor heating and cooling manifolds. The actuator is available in both 24 V and 230 V versions and is suitable for use with various thermostats and control solutions.

The actuators enable automatic system control according to room temperature and help ensure efficient and comfortable operation.

Tycroc TSA actuators are suitable for use with Tycroc manifolds and various control solutions. The correct actuator selection depends on the thermostat or automation solution used.

PRODUCTSDIMENSIONS
TSA230230 V ~ 50–60 Hz / 1,8 W / NC / M30 × 1,5
TSA2424 V ~ 50–60 Hz / 1,6 W / NC / M30 × 1,5

TSA Actuators Technical Data Sheet / Assembly Instructions (TDS) MULTI-LANG

Tycroc PBS 90° plastic bend support

PBS20_01

Impact resistant plastic bend support to fix PE-RT/PEX pipe 90°.

PRODUCTSDIMENSIONS
PBS16for 14-18 mm pipes
PBS20for 20-22 mm pipes

PBS16 & PBS20 Technical Data Sheet (TDS) EN

Tycroc TCA compression adapter

Toru_adapter_2

Brass compression adapter for plastic-pipes, 3/4″ Euro, nickel-plated connector nut.

PRODUCTSDIMENSIONS
TCA1616 × 2 mm 3/4" Euro
TCA1717 × 2 mm 3/4" Euro
TCA2020 × 2 mm 3/4" Euro

Tycroc TSL valves with handles

TSL-VA1

Set of straight outlet valves, made of nickel-plated brass, with 1” F main connection and 1 ¼” swivel nut to connect the TSL manifold.

  • each valve with handle (red/blue) to open and close the valve
  • L=60 mm.
PRODUCTDIMENSIONS
TSL-VA11¼” - 1”, L=60 mm, (pair)